Model IFMA DIN Rail Frequency to Analog Converter

Brand: Red Lion Controls

The Model IFMA accepts a frequency input, and outputs an Analog voltage or current in proportion to the input frequency, with 0.1% accuracy. 

The full scale input frequency can be set to any value from 1 Hz to 25 KHz, either with a frequency source, or digitally with the on-board rotary switch and push-button. 

The IFMA utilizes a seven position DIP switch, a rotary switch, a push-button and two indication LEDs to accomplish input circuit configuration, operational parameter set-up, and Input/Output indication. 

The input circuitry is DIP switch selectable for a variety of sources.
Features
  • Simple on-line range setting
  • User settable full scale frequency from 1 Hz to 25 kHz
  • Four output operating ranges (0-5 V, 0-10 V, 0-20 mA, and 4-20 mA)
  • Programmable input circuit accepts outputs from a variety of sensors
  • 85-250 Vac and 9-32 Vdc powered versions available
  • Low frequency cut-out and over range indication
  • 3-Way electrical isolation
  • Input and output indication LEDs

Specifications

Accuracy

  • ± 0.1 % of Full Scale Range
  • ± 0.2 % for 0-5 Vdc Range

Approvals & Certifications

  • CE
  • CSA C22.2 No. 14 (C,US)
  • EMC Emissions: EN 50081-2 (Industrial Environment), CISPR 11 Radiated & Conducted Emissions, Immunity: EN 50082-2 (Industrial Environment), ENV 50140, 50141, EN 61000-4-2, 4, 8
  • IECEE CB Scheme Test Report #97ME50135-042297, 61010-1, EN 61010-1
  • UL File #E137808, 508

Current

  • Power Up Current: 600 mA for 50 milliseconds, Max.

Electrical Connectors

  • Screw Typical Terminal Block

Enclosure, Body Material

  • Plastic

Frequency

  • Operating Frequency: 0 to 25 kHz

Humidity

  • 85 % Relative Humidity, Non-Condensing from 0° to 50° C

Indication

  • LED

Input

  • High Bias Input Trigger Level IH: 3 V
  • High Bias Input Trigger Level IL: 2.5 V
  • Low Bias Input Trigger Level IH: 0.75 V
  • Low Bias Input Trigger Level IL: 0.25 V

Input Impedance

  • 33 kiloohms Min. with the Sink & Source DIP Switches in the OFF Position

Input Signal

  • ± 90 V
  • 2.75 mA - Max.

Isolation

  • Breakdown Voltage (Dielectric Withstand): 2,200 V between Power & Input, & Power & Output
  • Breakdown Voltage (Dielectric Withstand): 500 V between Input & Output for 1 Minute

Mounting

  • DIN Rail Mounting

Operating Temperature

  • 0° to 50° C (32° to 122° F)

Output

  • 0-10 Vdc at 10 mA - Max.
  • 0-20 mA at 10 Vdc Min.
  • 0-5 Vdc at 10 mA - Max.
  • 10 V Across A Minuimum 1 Kiloohm Load (10 mA), Factory Calibrated for Loads greater than 1 Megaohm
  • 20 mA through A, Max.
  • 4-20 mA at 10 Vdc Min.

Power

  • 85-250 Vac, 48 to 62 Hz, 6.5 VA
  • 9-32 Vdc, 2.5 W
  • Sensor Power: (AC Version Only) +12 Vdc ± 25 % at 60 mA - Max.

Resistance

  • Current Sinking: Internal 3.9 kiloohms Pull-Up Resistor for Sensors with Current Sinking Output, Max.
  • Current Sourcing: Internal 1 kiloohms Pull-Down Resistor for Sensors with Current Sourcing Output., Max.

Resolution

  • Current: 5 μA Min.
  • Voltage: 3.5 mV Min.

Response Time

  • 5 milliseconds + 1 Period to 10 seconds + 1 Period

Shock

  • 30 G, 11 milliseconds in 3 Directions According to IEC 68-2-27

Storage Temperature

  • -40° to 80° C (-40° to 176° F)

Vibration

  • 5 G at 5 to 150 Hz in X, Y, Z Direction for 1.5 Hours According to IEC 68-2-6
show more