8030 In-Line Flowmeter

Brand: Burkert Fluid Control Systems

The paddle wheel flowmeter for continuous flow measurement is especially designed for use in neutral, slightly aggressive, solid free liquids. 

The flowmeter is made up of a compact fitting (S030) and an electronic module (SE30) quickly and easily connected together by a QuarterTurn. The Burkert designed fitting system ensures simple installation of the devices into all pipes from DN06 to DN65. 

The flowmeter produces a frequency signal, proportional to the flow rate, which can easily be transmitted and processed by a Burkert transmitter/controller.
Features
  • Economic integration in pipe systems without any additional piping
  • 3-wire frequency pulse version to directly interface with PLC’s (both PNP and NPN)
  • Connection to Burkert devices in remote versions

Specifications

Ambient Temperature Range

  • Operating & Storage: -15° to 60° C (5° to 140° F)

Approvals & Certifications

  • EN ISO 5167-1
  • EMC EN 61000-6-2, 61000-6-3
  • PED 97/23/CE

Bearing Material

  • Ceramics

Cable Length

  • Maximum

Consumption

  • Current (Hall “Low Power” Version): ≤ 0.8 mA
  • Current (Hall Version): ≤ 30 mA

Cover Material

  • Polycarbonate (PC)

Diameter

  • Pipe: 1/4 to 2-1/2” (DN06 to DN 65)

Duty Cycle

  • Output: 1/2 ± 10 %

Electrical Connectors

  • 1.5 mm², Max.
  • Cable Plug EN 175301-803
  • Shielded Cable

Enclosure, Body Material

  • Polycarbonate (PC)

Environmental Protection

  • IP65

Frequency

  • Output: 0 to 300 Hz

Humidity

  • ≤ 80 % Relative Humidity, Non-Condensing

Linearity

  • ± 0.5 % of Full Scale

Materials of Construction

  • Male Fixed Connector: Polycarbonate (PC)

Measuring Error

  • Standard K-factor: ± 2.5 % of Reading
  • Teach-In: ± 1 % of Reading

Measuring Range

  • 0.3 to 10 m/sec

Operating Voltages

  • 12-36 Vdc Filtered & Regulated

Output

  • Hall “Low Power” Version: 10 mA - Max.
  • Hall Version (NPN): 0.2-36 Vdc
  • Hall Version: 100 mA - Max.

Pipe Connection

  • DN 15 Pipe
  • DN 20 Pipe
  • DN 25 Pipe
  • DN 32 Pipe
  • DN 40 Pipe
  • DN 50 Pipe
  • DN 65 Pipe

Plug Material

  • Cable Plug: Polyamide (PA)

Power Supply

  • 12-36 Vdc

Pressure Range

  • bar: 0 to 16
  • kPa: 0 to 1,600
  • psi: 0 to 232.16

Process Temperature

  • PP: 0° to 80° C (32° to 176° F)
  • PVC: 0° to 50° C (32° to 122° F)
  • Stainless Steel, Brass, PVDF: -15° to 100° C (5° to 212° F)

Repeatability

  • ± 0.4 % of Reading

Reverse Polarity Protection

  • Yes

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM
  • Seal: NBR

Shock

  • EN 60068-2-27

Switch Type

  • Hall Version (NPN & PNP), Hall “Low Power” Version (NPN): Transistor

Tri-Clamp Connection

  • DN 15 Tri-Clamp
  • DN 20 Tri-Clamp
  • DN 25 Tri-Clamp
  • DN 32 Tri-Clamp
  • DN 40 Tri-Clamp
  • DN 50 Tri-Clamp
  • DN 65 Tri-Clamp

Vibration

  • EN 60068-2-6

Viscosity

  • 300 cSt, Max.

Voltage

  • Dielectric Strengh: 2,300 Vac

Welded Connection

  • DN 15 Weld End
  • DN 20 Weld End
  • DN 25 Weld End
  • DN 32 Weld End
  • DN 40 Weld End
  • DN 50 Weld End
  • DN 65 Weld End

Wetted Materials

  • Axis: Ceramics
  • Fitting, Sensor Armature, Paddle Wheel: PVDF
  • Fitting, Sensor Armature: 316L Stainless Steel, 1.4404
  • Fitting, Sensor Armature: Brass
  • Fitting, Sensor Armature: Polypropylene (PP)
  • Fitting, Sensor Armature: PVC

Documentation

show more