Images are representations only.
AME 10/20/30 Modulating Controlled Actuator
Brand: Danfoss
Actuators without safety function (AME 10, AME 20 , AME 30) are mainly used with VS, VM, VB, or AVQM valves.
Safety version is activated automatically in case of power failure or if the power supply is switched off by the safety thermostat.
Actuators automatically adapt stroke to valve end positions which reduces commissioning time.
Features- The advanced design incorporates load related ‘switch-off' to ensure that actuators and valves are not exposed to overload
- Digital feedback end position indication signal for valve end position is available by terminal 4 or 5
- Low weight and robust
- The advanced design incorporates a diagnostic LED and operational data capture
- DIN EN 14597 certified safety function
Specifications
Brand
Ambient Temperature Range
- 0° to 55° C (32° to 131° F)
Approvals & Certifications
- EN 14597
Approvals & Certifications
- CE
- EMC Directive 2004/108/EC: EN 61000-6-2, EN 61000-6-3
- Low Voltage Directive (LVD) 2006/95/EC: EN 60730-1, EN 60730-2-14
Class
- Protection Class: Class I (230 V)
- Protection Class: Class II
- Protection Class: Class III (24 V)
Consumption
- Power Consumption: 4 VA for AME 10 & 20
- Power Consumption: 9 VA for AME 30
Display
- LED Display
Environmental Protection
- IP54
Frequency
- 50/60 Hz
Humidity
- 5 to 95 % Relative Humidity, No-Condensing
Input
- 0-10 V (2-10)
- 0-20 mA (4-20) mA
Output
- 0-10 V (2-10) V
Override
- Manual Override
Power Supply
- 24 V, 10 to -15 %, AC
Process Temperature
- Maximum
Resistance
- Input Resistance: 24 kiloohms
- Input Resistance: 500 ohms
Speed
- AME 10: 14 sec/mm
- AME 20: 15 sec/mm
- AME 30: 3 sec/mm
Storage Temperature
- Transport Temperature: -40° to 70° C (-40° to 158° F)
Switch Type
- DIP Switches
