Images are representations only.
3363 Electromotive Diaphragm Control Valve
Brand: Burkert Fluid Control Systems
The innovative diaphragm control valve Type 3363 is the solution when it comes to demanding control tasks in areas with media contact such as the Food and Beverage, Cosmetic, Pharma and Biopharma Industry.
The electromotive actuator with ball screw positions the diaphragm with quasi delay free with highest precision and - for electromotive valves - unique speed of 4 mm/s that can be varied According to plant design.
Pressure variations or shocks in the medium aren't transferred to the valve position. If necessary, the safety position can be realized with optional energy storage in case of power failure.
Many helpful functions for process monitoring, valve diagnostics and predictive maintenance can be used. Beside the mechanical position indication a 360°- LED illuminated ring displays valve position and information about warnings or errors.
Communication is possible with both Analog signals and modern fieldbus systems.
Specifications
Ambient Temperature Range
- With Display: -10° to 60° C (14° to 140° F) - Depends on Media (Process) Temperature
- With SAFEPOS Energy Storage: -10° to 55° C (15° to 130° F) - Depends on Media (Process) Temperature
- Without Display: -10° to 65° C (15° to 150° F) - Depends on Media (Process) Temperature
Applications
- Cosmetics
- Food Stuffs/Sterile Applications
- Pharma & Bio-pharma Industry
Approvals & Certifications
- EHEDG
- FDA
- Inspection Certificate 3.1 According to EN 10204 - Material Test Report
- Inspection Certificate 3.1 According to EN 10204 - Surface Roughness Measurement
- Test Report 2.2 According to EN 10204
Battery Life
- Energy Storage SAFEPOS Energy-Pack: 10-Years - Depending on Operating Conditions
Communication
- EtherNet/IP
- Modbus/TCP
- PROFINET
Current
- Analog Control (Setpoint): 0-20 mA
- Operating: 3 A, Max.
Deadband
- 0.4 % Min.
Diaphragm Material
- EPDM Laminated (AB, AD, EU, ER)
- FKM (FF)
- PTFE (EA, EU)
Display
- Touch Screen
Duty Cycle
- 100 % Duty Cycle
Electrical Connectors
- 1 & 2 Circular Plug-In Connector M12, 5-Pin & 8-Pin
- 2 x M20, Cable Gland
Enclosure Finish
- Internally Electro-Polished [Ra≤ 0.38 μm (ASME BPE SF4)]
- Internally Mechanically Polished [Ra≤ 0.5 μm (ASME BPE SF1)]
Enclosure, Body Material
- Actuator Housing: Aluminum Powder-Coated
- Forged, Tube, Cast: AISI 316L Stainless Steel (1.4435/BN2)
- Polypropylene (PP)
- Polyvinyl Chloride (PVC)
- Polyvinylidene Fluoride (PVDF)
Environmental Protection
- IP65
- IP67
Flow Rate
- 0.5 to 41 m³/hour (Kvs) - Forged Body
- 2 to 47 m³/hour (Kvs) - Tube Body
- 3.5 to 26 m³/hour (Kvs) - Plastic Body
Indication
- LED
Input
- 0-5 V (Log 0) - Inverted Input Reversed Accordingly
- 10-30 V (Log 1) - Inverted Input Reversed Accordingly
- Analog Input Set Point: 0-10 V at (Input Resistance 22 kiloohms) - Galvanically Isolated from the Supply Voltage & Analog Output
- Analog Input Set Point: 0-20 mA at (Input Resistance 60 ohms) - Galvanically Isolated from the Supply Voltage & Analog Output
Interface Connection
- CAN
- USB-Bus
Materials of Construction
- Actuator (Top, Bottom Part): Polyphenylene Sulfide
- Interface: AISI 304H Stainless Steel (1.4308)
Measuring Range
- Analog Input (Frequency): -20° to 220° C (-4° to 428° F)
Media
- Aggressive or Abrasive Fluids
- Liquids
- Neutral Gases
- Sterile
Mounting Position
- Prefer: Upright with Actuator
Name Plate, Tag Material
- AISI 316L Stainless Steel (1.4435)
Nominal Pressure
- psi: 232.1 (kPa: 1,600, bar: 16)
Operating Pressure
- EPDM, FKM - psi: 58 to 145 (kPa: 400 to 1,000, bar: 4 to 10) - Max.
- PTFE, Advanced PTFE, Gylon - psi: 36 to 145 (kPa: 250 to 1,000, bar: 2.5 to 10) - Max.
Operating Voltages
- 24 Vdc at ± 10 %, Max.
Operation
- Electrical Operation
- Manual Operation
Output
- Analog Burde (Last): 0 to 560 ohms (For Current Output 0-20 / 4-20 mA)
- Analog Current: 10 mA - Max.
- Digital Current Limit: 100 mA
Power
- Electronic without Actuator (W): 2-5 W, Max.
Power Supply
- 24 Vdc ± 10 %, Max.
Process Temperature
- EPDM (AB), PTFE/EPDM (EA): -10° to 130° C (14° to 266° F) - Steam Sterilisation +140° C (284° F) for 60 Minute
- EPDM (AD), Advanced PTFE/EPDM (EU): -5° to 143° C (23° to 289° F) - Steam Sterilisation +150° C (302° F) for 60 Minute
- FKM (FF): 0° to 130° C (32° to 266° F) - Not Recommended for Steam
- Gylon/EPDM Laminated (ER): -5° to 130° C (23° to 266° F) - Steam Sterilisation +140° C (284° F) for 60 Minute
Resistance
- Analog Input (4-20 mA): 60 ohms
- Analog Input Resistance (Frequency): > 30 kiloohms
Resolution
- Analog Input (Pt100): < 0.1° C (< 32.18° F)
- Analog Input Frequency: 1 % of Measurement Value
Response Time
- Closure Time: < 1.5 to 4.5 seconds - Depends on Diaphragm Size
Seat / Seal Material
- Seal: EPDM
Shock
- Mechanical: 50 G According to IEC 60068-2-27 Test Ea
Size
- Diaphragm: 0.31 to 1.57” (8 to 40 mm)
Speed
- Travel: 4 mm/sec
Switch Type
- DIP Switches
Tri-Clamp Connection
- 1” Tri-Clamp
- 1/2” Tri-Clamp
- 1/4” Tri-Clamp
- 1-1/2” Tri-Clamp
- 1-1/4” Tri-Clamp
- 2” Tri-Clamp
- 3/4” Tri-Clamp
- 3/8” Tri-Clamp
Valve Type
- Diaphragm ON/OFF Valve
- Manual
Vibration
- Sinusoidal: 5 G According to IEC 60068-2-6 Test Fc
Voltage
- Analog Control (Setpoint): 0-10 V
Welded Connection
- 1” Weld End
- 1/2” Weld End
- 1/4” Weld End
- 1-1/2” Weld End
- 1-1/4” Weld End
- 2” Weld End
- 3/4” Weld End
- 3/8” Weld End
