8804 Plastic Electric Rotary Actuator

Brand: Burkert Fluid Control Systems

The electric ball valve Type 8804 consists of an electrical rotary actuator and a 2/2 or 3/2-way ball valve made of plastic. Different housings and materials are available for various applications. 

The rotary actuator is compactly built. It can be used also as single device for the operation of other control elements.
Features
  • The ball valves are equipped with the so called dual block technology. This system allows you to lock the union nuts in the preset position. It prevents them separating during operation
  • Heat resistor and torque limiter are standard. The body is made of low inflammable material, classified according to UL 94 V0

Specifications

Actuator Type

  • Handle
  • Pneumatic
  • Rotary

Ambient Temperature Range

  • -10° to 55° C (15° to 130° F)

Cover Material

  • Actuator: Nylon
  • Actuator: Polyamide (PA 6.6)

Duty Cycle

  • Rating: S4=50 % According to IEC 34

Electrical Connectors

  • Cable Glands ISO M20
  • Cable Plug According to EN 175301-803 (Supply Voltage)

Electrical Rating

  • Limit Switches: 250 Vac / 1.5 A, Max.

Enclosure, Body Material

  • Actuator: Nylon
  • Polyamide (PA 6.6)
  • Polypropylene (PP)
  • PVC-C
  • PVC-U
  • PVDF

Environmental Protection

  • IP66 with Cable Plug Installed

Flow Rate

  • 4.8 to 204 m³/hour (Kv) - Water

Input

  • Positioner Card with Normal: 0-10 V
  • Positioner Card with Normal: 4-20 mA

Materials of Construction

  • Actuator (Gear Box, Axis): Stainless Steel
  • Actuator (Gearbox): Polycarbonate (PC)

Media

  • Gas
  • Liquids

Mounting

  • Don't Mount the Actuator Upside Down

Operating Pressure

  • PP-H - psi: 145 (kPa: 1,000, bar: 10)
  • PVC-U, PVDF, PVC-C - psi: 232 (kPa: 1,600, bar: 16)

Operating Voltages

  • 100-240 Vac at 50/60 Hz
  • 100-350 Vdc
  • 12-48 Vdc
  • 15-30 Vac at 50/60 Hz

Orifice Size

  • 0.39” to 1.96” (10 to 50 mm)

Pipe Connection

  • 1” Pipe (DN 25)
  • 1/2” Pipe (DN 15)
  • 1-1/2” Pipe (DN 40)
  • 1-1/4” Pipe (DN 32)
  • 2” Pipe (DN 50)
  • 2-1/2” Pipe (DN 65)
  • 3/4” Pipe (DN 20)

Pressure Range

  • PP - psi: 145 (kPa: 1,000, bar: 10)
  • PVC-U, PVDF - psi: 232 (kPa: 1,600, bar: 16)

Process Temperature

  • PP: 10° to 80° C (50° to 176° F)
  • PVC-U: 0° to 60° C (32° to 140° F)
  • PVDF: 0° to 120° C (32° to 248° F)

Resistance

  • Input Resistance for Control (0-10 V): 10 kiloohms
  • Input Resistance for Control (0-20 / 4-20 mA): 100 ohms

Resolution

  • Control Operation: 1°

Response Time

  • Rotation Time for 90°: 12 seconds

Rotation

  • 90° (± 5°)

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM
  • Seal: PTFE

Switch Type

  • Limit

Tolerance

  • Voltage: ± 10 % - for 12-48 Vdc the Operating Voltage Should Not Go Below 11.5 V

Torque

  • Actuator: 20 Nm (177 In/Lbs)

show more