CI 210-420 Contactor with Interface Relay

Brand: Danfoss

The contactor programme CI 210-420 consist of one frame size. 

The series are equipped with three NO main contacts and an auxiliary contact block with one NO and one NC auxiliary contact. Spare contacts are available and by maintenance, the moveable system blocks when removing the chamber. 

The factory setting makes the contactors operate as standard conventional contactors, but for PLC application, the built-in interface relay can be activated. 

A long electrical lifetime makes the CI 210 EI - 420 EI contactors suitable for operation of all kinds of electrical loads in modern industry. 

A wide range of clip-on aux. contacts, timers, surge suppressors, mechanical interlock and marking plates makes the CI210 EI - 420 EI programme very flexible and suitable both for OEMs and panel builders.

Specifications

Brand

Applications

  • Programmable Logic Controller

Approvals & Certifications

  • BV
  • CSA
  • GL
  • IEC 60947-4-1, EN 60947-4-1
  • LRS
  • UL

Coil Voltage

  • 110-500 V

Connection Style

  • Clamped Washer
  • Screw

Consumption

  • 7 W - Coil Consumption AC

Current

  • 400-630 A - Short Circuit Co-Ordinator
  • 450 A

Electrical Connectors

  • Terminal Block

Electrical Contacts

  • Normally Closed
  • Normally Open

Electrical Protection

  • Short Circuit

Frequency

  • 50/60 Hz

Indication

  • LED

Mounting

  • Screw Mount

Operating Temperature

  • Maximum

Operation

  • 200 - Switching Per Hour AC-3 Load Operations

Output

  • 24 Vdc

Power

  • 110-220 KW

Resistance

  • 0.15 to 0.22 Megaohm

Sensor / Probe Type

  • PTC

Storage Temperature

  • -40° to 80° C (-40° to 176° F)

Supply Voltage

  • 12 kV - Pulse Voltage

Torque

  • 25 Nm (221.3 In/Lbs) - Terminal Block
  • 43 Nm (380.5 In/Lbs) - Screw

Vibration

  • 2 G, 10 to 150 Hz

show more