Images are representations only.
CI 210-420 Contactor with Interface Relay
Brand: DanfossThe contactor programme CI 210-420 consist of one frame size.
The series are equipped with three NO main contacts and an auxiliary contact block with one NO and one NC auxiliary contact. Spare contacts are available and by maintenance, the moveable system blocks when removing the chamber.
The factory setting makes the contactors operate as standard conventional contactors, but for PLC application, the built-in interface relay can be activated.
A long electrical lifetime makes the CI 210 EI - 420 EI contactors suitable for operation of all kinds of electrical loads in modern industry.
A wide range of clip-on aux. contacts, timers, surge suppressors, mechanical interlock and marking plates makes the CI210 EI - 420 EI programme very flexible and suitable both for OEMs and panel builders.
Specifications
Brand
Applications
- Programmable Logic Controller
Approvals & Certifications
- BV
- CSA
- GL
- IEC 60947-4-1, EN 60947-4-1
- LRS
- UL
Coil Voltage
- 110-500 V
Connection Style
- Clamped Washer
- Screw
Consumption
- 7 W - Coil Consumption AC
Current
- 400-630 A - Short Circuit Co-Ordinator
- 450 A
Electrical Connectors
- Terminal Block
Electrical Contacts
- Normally Closed
- Normally Open
Electrical Protection
- Short Circuit
Frequency
- 50/60 Hz
Indication
- LED
Mounting
- Screw Mount
Operating Temperature
- Maximum
Operation
- 200 - Switching Per Hour AC-3 Load Operations
Output
- 24 Vdc
Power
- 110-220 KW
Resistance
- 0.15 to 0.22 Megaohm
Sensor / Probe Type
- PTC
Storage Temperature
- -40° to 80° C (-40° to 176° F)
Supply Voltage
- 12 kV - Pulse Voltage
Torque
- 25 Nm (221.3 In/Lbs) - Terminal Block
- 43 Nm (380.5 In/Lbs) - Screw
Vibration
- 2 G, 10 to 150 Hz
