Images are representations only.
JIP Hot Tap Ball Valve
Brand: DanfossDanfoss JIP™ hot tap ball valves are designed for extensions of district heating systems and other closed loop water systems where the water is treated to avoid internal corrosion.
Installation can be done using dedicated tool set, while the system is fully operational, which minimizes disruption to endusers and saves time and money.
Having a fully welded body, the valves meet the requirements for valves used in district heating and district cooling systems and offer the highest degree of security.
The valve design makes them ideal for underground installation due to:
- Energy saving: with optimum flow design valves have highest kv on the market and consequently lowest pump energy costs
- Long lifetime and optimal tightness due to design and material selection in ball seal and stem seal (carbon reinforced PTFE)
- The valves are maintainance free
Specifications
Brand
Approvals & Certifications
- ISO: 9001,14001
- PED Directive 97/23/EEC Modul H1
Approvals & Certifications
- EN 12266
- OHSAS 18001
Ball Material
- 304 Stainless Steel - X5CrNi18-10, EN 10088 / W.nr. 1.4301
Enclosure, Body Material
- Weldable Mild Steel (P235 GH / Mat. No. 1.0345 (~ St. 37.0))
Flow Rate
- 1 to 1,000 m³/hour
Materials of Construction
- Welding Ends: Weldable Mild Steel (P235 GH / Mat. No. 1.0345 (~ St. 37.0))
Media
- Circulation Water
- Glycolic Water up to 50 %
Pressure Range
- psi: 0 to 580.2 (MPa: 0 to 4, bar: 0 to 40)
Seat / Seal Material
- Seat Rings: Carbon Reinforced PTFE
- Stem Sealings: EPDM
Stem Material
- Valve: Stainless Steel (X5CrNi18-10 (EN 10088) / W.nr. 1.4301 (~ AISI 304))
Storage Temperature
- -40° C (-40° F) Min.
Temperature Range
- 0° to 180° C (32° to 356° F)
Welded Connection
- DN 100 Weld End
- DN 20 Weld End
- DN 25 Weld End
- DN 32 Weld End
- DN 40 Weld End
- DN 50 Weld End
- DN 65 Weld End
- DN 80 Weld End
