8054/8055 Full Bore Magmeter

Brand: Burkert Fluid Control Systems

The complete full bore magflowmeter Type 8054/8055, which consists of a magnetic sensor fitting Type S054 or S055 connected to an electronics Type SE56 (blind in compact version or with display in compact or remote version), is designed for applications with liquids with a minimum conductivity of 5 µS/cm. 

Combined with a valve as the actuating element, the complete full bore magflowmeter Type 8054/8055 can control high-precision dosing operations and flow measurements in potable water treatment and waste water treatment.
Features
  • Combination of magflowsensor fitting S054 or S055 and electronics SE56
  • Continuous measurement or Batch Control
  • Version without (S054) or with (S055) flanges
  • For water treatment and general-purpose applications

Specifications

Applications

  • Water Treatment

Approvals & Certifications

  • CE
  • EN 1092-1

Cable Length

  • Remote Version (S055), Electrode Cable, Coil Cable: 10 metres

Conductivity

  • 20 µS/cm Min. with Demineralized Water
  • 5 µS/cm Min.

Diameter

  • Pipe: 1 to 8” (DN 25 to DN 200)

Electrical Connectors

  • 2 Cable Glands PG9
  • Junction Box

Enclosure, Body Material

  • 304 Stainless Steel
  • 316 Stainless Steel
  • Carbon Steel Painted

Environmental Protection

  • IP65
  • IP67
  • IP68

Flange Size - 1-1/2” (DN 40)

  • 1-1/2” (DN 40) - 150# ANSI

Flange Size - 1-1/4” (DN 32)

  • 1-1/4” (DN 32) - 150# ANSI

Flange Size - 1” (DN 25)

  • 1” (DN 25) - 150# ANSI

Flange Size - 2-1/2” (DN 65)

  • 2-1/2” (DN 65) - 150# ANSI

Flange Size - 2” (DN 50)

  • 2” (DN 50) - 150# ANSI

Flange Size - 3” (DN 80)

  • 3” (DN 80) - 150# ANSI

Flange Size - 4” (DN 100)

  • 4” (DN 100) - 150# ANSI

Flange Size - 5” (DN 125)

  • 5” (DN 125) - 150# ANSI

Flange Size - 6” (DN 150)

  • 6” (DN 150) - 150# ANSI

Flange Size - 8” (DN 200)

  • 8” (DN 200) - 150# ANSI

Flow Rate

  • 20,000 gpm (100,000 L/minute, 5,000 m³/hour)
  • Maximum
  • Minimum 0 to 0.4 m/sec: 0 to 45.20 m³/hour

Materials of Construction

  • Electrode: 316L Stainless Steel
  • Electrode: Hastelloy C
  • Electrode: Platinum Rhodium
  • Electrode: Tantalum
  • Electrode: Titanium
  • Lining: Ebonite
  • Lining: Polypropylene (PP) - Max.
  • Lining: PTFE

Measuring Range

  • 0 to 1,130 m³/hour

Pressure Range

  • bar: 0 to 63.98
  • kPa: 0 to 6,398
  • psi: 0 to 928

Process Temperature

  • With PP Lining: 0° to 60° C (32° to 140° F)
  • With PTFE Lining: -20° to 130° C (-4° to 266° F)

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM

  • Potable water treatment and waste water treatment

show more