Images are representations only.
6014 Banjo Direct-Acting 3/2-Way Plunger Valve
Brand: Burkert Fluid Control SystemsValve 6014 is a direct-acting plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application.
A Burkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. The coils are moulded with polyamide or with chemically resistant epoxy.
Pulse coils are available for the reduction of electrical power consumption during operation. Optional manual actuation enables quick commissioning and easy maintenance.
In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X.
Specifications
Ambient Temperature Range
- 55° C (131° F) - Max.
BSP Connection
- G 1/4” Female
- G 1/8” Female
Consumption
- Power (DC Hot/Cold Coil): 8/9 W
- Power: 17 VA [Hold AC (Hot Coil)]
- Power: 24 VA (Inrush AC)
- Power: 2-8 W
- Power: 8 W [Hold AC (Hot Coil)]
Duty Cycle
- Single Valve: 100 % Duty Cycle Continuous Rating
Electrical Connectors
- Cable Plug
- DIN EN 175301-803 Form A
Electrical Contacts
- Normally Closed
Enclosure, Body Material
- Flange: Brass
- Flange: Polyamide
- Stainless Steel
- Valve: Aluminum
Environmental Protection
- IP65 with Cable Plug
- IP66
- NEMA 4X with Cable Plug
Flow Rate
- Air: 75 to 174 QNn (L/min)
Insulation
- Coil Insulation: Class B
- Insulation Class: Epoxy Class H
Materials of Construction
- Armature Guide Tube: AISI 305 Stainless Steel, 1.4303
- Coil: Epoxy - High Temperature Version
- Coil: Polyamide (PA)
- Stopper, Magnetic Core: AISI 430FR Stainless Steel (1.4105)
- Sub Base: AISI 304 Stainless Steel, 1.4301
- Sub Base: Steel (Surface Finish Thick Film Passivated)
Media
- Compressed Air
- Hydraulic Oil
- Natural Gas
- Neutral Gases & Fluids
- Technical Vacuum
- Town Gas
- Water
Mounting Position
- Preferably with Actuator Upright
Nut & Bolt Material
- Lock Nut: Steel (Surface Finish Thick Film Passivated)
O-Ring Material
- FKM
- NBR
Operating Voltages
- 230 Vac / 50 Hz
- 24 Vac / 50 Hz
- 24 Vdc
Orifice Size
- 0.05” to 0.09” (1.5 to 2.5 mm)
Override
- Manual Override
Pressure Range
- psi: 0 to 145 (kPa: 0 to 1,000, bar: 0 to 10)
Process Temperature
- Epoxy Coil: -10° to 120° C (14° to 248° F)
- Polyamide Coil: -10° to 100° C (14° to 212° F)
Response Time
- AC & DC (Opening, Closing): 10 to 22 milliseconds
Ring Material
- Shading Ring: Copper (Cu) - Brass Version
- Shading Ring: Stainless Steel (Ag) - Stainless Steel Version
Screw Material
- AISI 304 Stainless Steel 1.4301
- Brass (CuZn)
Seat / Seal Material
- Armature Seal: FKM
- Seal (Usit Ring): Aluminum
- Seal (Usit Ring): NBR
- Seal: EPDM
Solenoid Type
- 3/2-Way
Spring Material
- AISI 301 Stainless Steel 1.4310
Tolerance
- Voltage: ± 10 %
Viscosity
- 21 mm²/sec, Max.
